DALLAS, TX In Spring 2022, Mark Cuban Cost Plus Drug Company (MCCPD) will come to life in a 22,000 square-foot medicine manufacturing laboratory in Dallas, Texas. With Doctor Alex Oshmyanksy’s mission to produce low-cost versions of high-cost generic drugs, and Mark Cuban’s investment to back the
FORT WORTH, TEXAS AFF3 Building 175 & AFF2 This phase of construction added four new paint booths to Aircraft Finish Facility (AFF). The AFF is one of the last steps in manufacturing an F-35 Aircraft. Due to the nature of the painting process, each booth must be
CARROLLTON, TEXAS Brandt worked directly with the owner and their client to design and install two stand-alone rooftop units, with 43” high roof curbs with HEPA filters. Brandt was responsible for the roof work, ceiling file/grid removal and re-installation, hoisting, insulation, test and balance, and start-up
AUSTIN, TX This project included the build-out of 150,000 sf of semiconductor fabrication area and another 300,000 sf of support area on three (3) floors in the existing FAB-2 building for Samsung Austin Semiconductor. Brandt’s scope of work for this project included the installation of the HVAC
LEWISVILLE, TEXAS Mary Kay Inc. built a new, U.S.-based global manufacturing and research and development facility located in Lewisville, Texas. Named in honor of company co-founder, executive chairman and son of Mary Kay Ash, the Richard R. Rogers (R3) Manufacturing Manufacturing/R&D Center supports the global cosmetic
LEWISVILLE, TEXAS Mary Kay Inc. built a new, U.S.-based global manufacturing and research and development facility located in Lewisville, Texas. Named in honor of company co-founder, executive chairman and son of Mary Kay Ash, the Richard R. Rogers (R3) Manufacturing/R&D Center supports the global cosmetic company’s
GRAND PRAIRIE, TEXAS The Flex-N-Gate project was a design-build, MEP project in Grand Prairie, Texas. Flex-N-Gate is an international manufacturer of car and truck bumpers, which requires the use of several unique and intricate machines. This job provided production space and increased production for the General
SHINER, TEXAS Constructed in 1909, Brandt has been providing electrical services for the additions and renovations taking place at the Spoetzl Brewery in Shiner, Texas. The plant has remained fully operational throughout the construction process. The work Brandt is completing at Shiner ranges from controls work to
SAN ANTONIO, TEXAS Brandt’s scope of work involves a multitude of areas, including the main warehouse facility, an office space, and a variety of outbuildings. The mechanical system serving the warehouse consists of water-cooled chillers, which will provide chilled water to the air rotation units placed
HOUSTON, TEXAS Brandt was awarded the new Tortilla and Corn Chip Plant in Houston for HEB. The plant is capable of producing an output of 4,000lbs. of chips per day. Brandt’s scope included the Design and Construction of the MEP systems for the project. The scope consisted